2020 John Deere 5100GN

MoreLess
Limited Time Offer!

Selling Price -$62,449.00

  • Configuration:Narrow
  • Cab:Cab
  • Transmission:Power Reverser
  • Front Axle:MFWD
  • Tire Width:Narrow
  • English Operator's Manual and Decal Kit
  • 24F/12R PowrReverser Transmission with 540/540E PTO (includes creeper)
  • Premium Narrow Cab (V-Cab)
  • Horizontal Exhaust
  • Three Pump Hydraulic System
  • Three Rear Selective Control Valves (SCVs) with lever controls
  • ElectroHydraulic actuation 540 and 540E rpm
  • Base weight 150 Lbs (68 kg) - W/O Tow Pin
  • 3-Point Hitch with Adjustable Ball Ends for Draft Links
  • Mechanical Lift Rod
  • 420/70R28
  • Four-Wheel Drive (4WD)
  • 280/70R18 Heavy Duty (2 position rims)
  • Intelligent Power Management (IPM)
  • Additional Lift Cylinder
  • Electronic Battery Switch
  • 2020
  • John Deere
  • 5100GN
  • Base
  • Compact
  • Model: FPTF34
  • 2300 rpm | at rated PTO speeds: 540 at 1938 rpm / 540E at 1648 rpm
  • Wet sleeved | 4
  • Turbocharged
  • Final Tier 4 | Diesel Oxidation Catalyst (DOC) and Selective Catalyst Reduction (SCR)
  • 207 cu in. (3.4 L)
  • 100 hp (74.6 kW)
  • 87 hp (64.9 kW)
  • 24F/12R PowrReverser, EH Hi-Lo
  • Wet
  • Three point inboard planetary drives
  • Electrohydraulic
  • Dynamic Load Sensing, Hydrostatic, Flow Metering
  • Multi-disc rear braking
  • 7.50R16
  • 280/70 R18
  • 120 amp
  • Interval for engine oil change: 500 | Interval for hydraulic/transmission oil change: 750
  • 82 dB(A) rating
  • Open Center
  • Rated output: 25.5 gpm (96.5 L/min)
  • At a single rear SCV: 11 gpm (41.6 L/min)
  • Category 1/Category 1N
  • Standard: COBO MT SC74 M200
  • Front axle center Min: 8.9 in. (226.1 mm) / Max: 10.5 in. (266.7 mm)
  • 82.5 in (2098 mm)
  • 170 in. (4319 mm)
  • Without brakes: 11.9 ft (3627 mm)
  • Min: 8.9 in. (226.1 mm) | Max: 10.5 in.2 (66.7 mm)
  • 19.3 U.S. gal. (73.1 L)
  • Maximum behind lift points: 5620 lb (2549 kg)
  • Base machine OOS: 5864 lb (2660 kg) / Cab: 6558 lb (2975 kg) | Maximum permissible: 9259.41 lb (4200 kg)
  • Sensing type: Top Link Draft Sensing | Axle type: Flanged
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $62,449.00
  • FIVE POINTS
  • Pre-Owned
  • 21656
  • 2020
  • John Deere
  • 5100GN
  • 1AT5100GHLN009941
  • Model: FPTF34
  • 100
  • 1426
  • 24F/12R PowrReverser, EH Hi-Lo
  • Available
Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.

Warning WARNING: Operating, servicing and maintaining a passenger vehicle, an off-highway motor vehicle or a recreational marine vessel can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle or vessel in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle or vessel. For more information go to https://www.p65warnings.ca.gov/products/passenger-vehicle and https://www.p65warnings.ca.gov/products/marine.